Maximizing Biodiesel
Performance

  • Diesel (biodiesel) powered equipment will be here for many more years. 
  • To save costs & help the environment right now, we need to get the best possible performance from biodiesel blends.
home image
home image
home image

Maximizing Biodiesel
Performance

  • Biodiesel gets microbial growth & water contamination, very fast & in large quantities
  • This causes low power, unscheduled maintenance, higher fuel burn, higher filter costs & higher emissions, as well as potential for engine failure
  • High levels of contamination found in B35 biodiesel fuel, will have an extremely negative effect on profitability & the environment

Maximizing Biodiesel
Performance

It is all about improving your profitability!

  • Fuel is about 35% - 40% of total mining operation costs
  • Marine operations it is even higher at 50 - 60%
  • Equipment unscheduled maintenance for fuel issues will harm an operations profitability
  • ‘Low power’ diesel engine operating with contaminated fuel will also harm profitability with less production

EBS Fuel Services will remove all of the challenges you have with biodiesel contamination with no investment & no worries at all, as we take care of everything with our service!

Complete Onsite Fuel Service

Energi Biru Solusindo have a service solution with our EBS Fuel Services where we take care of everything related to getting your fuel to the right contamination level, keeping it there & reporting its condition to you on an ongoing basis

No CAPEX, we deliver a result with your fuel to a target specification (continually measured), or you don’t need to pay for our service!

Want us to contact you for a consultation?

Contact Us

Complete Onsite Fuel Service

Service Summary

  • Complete worry free service
  • No CAPEX investment, only a very low per liter fee
  • Assured fuel cleanliness or no need to pay
  • Industry standard metering systems
  • Custom design to get fuel clean, near ‘end use’
  • Fix low power/short loading
  • Less fuel burn vs. production
  • Drastically reduce on-board filters costs
  • Reduce injector & fuel system repair costs
  • Fix unscheduled maintenance for fuel issues
  • Site LV to get to all dispense points & tanks for service
  • Extend tank service life (microbial growth is acidic)
  • Very positive solution – ESG programs
Download
Ford Ranger Minesite Vehicle

Complete On-Site Fuel Service

Fuel Metering Solutions

Flow / Mass Measurement

Fuel flow/mass measurement options:

  • Can have delivery ticket printed
  • Data can be stored & then pushed remotely
  • Can be based on RFID tags or employee codes

Keep your fuel supplier honest!

Memograph Data Logger & Pusher

Memograph Data Logger & Pusher

Coriolis Mass Flow Meters (mass flow)

Coriolis Mass Flow Meters (mass flow)

Positive Displacement & Turbine Flow Meters.

Complete On-Site Fuel Service

3 Stage Fuel Conditioning Systems

Conditioning Fuel

We Provide Assurance of ISO:4406 – 18/16/13 or lower cleanliness

Through our EBS Fuel Services, we can get your fuel to the World-Wide Fuel Charter Standard (ISO:4406 – 18/16/14).

We monitor the fuel continually that is being dispensed & you only pay for our service if we hit the target cleanliness level.

We also remove water with our system as well as kill microbial growth in the fuel, without any additives.

We can get your biodiesel blend fuel to perform exceptionally well, without any investment from you & trouble free as our service does it all!

Materially increase production, save costs & reduce emissions all delivered with this service.

Cotinuous Particle Counter

Complete On-Site Fuel Service

Contamination Monitoring Systems

  • Installed in receiving or dispensing pipelines
  • Sample anywhere from 10 to 3,600 second intervals
  • Report ISO:4406, water RH% & temperature
  • Tests are logged & can report out the data live to anywhere
  • Preset alarms on levels of particulate or water

Keep your fuel supplier & EBS honest!

FS9V4 Open Portable contamination measurement system

Portable contamination measurement system

Complete On-Site Fuel Service

Environmental, Social & Governance Programs

ESG Benefits

“There is probably no more effective way to significantly reduce an operation’s carbon footprint, than by fixing contaminated fuel!”

  • This can quantifiably:
  • Reduce emissions
  • Use less fuel
  • Materially increase production from removing ‘low power’ issues & unscheduled maintenance related to contaminated fuel
  • Reduce the amount of heavy equipment, tyres, lubes that are needed to achieve the same production
  • We can bring in a team that can review & certify carbon credits savings for your operation though the use of our systems!
ESG Benefits
ESG Benefits
Download

Online Tank Conditioning Services

  • Fuel often comes with water in it from suppliers
  • Tanks breath in moist air which when it cools down, condenses & falls into the fuel in the tank
  • EBS service does ‘online’ (non man-entry) tank cleaning
  • We regularly clean storage tanks (up to 500 kl) & tanker/service trucks
  • We also do regular settling & bottom drains for all fixed tanks on site
Storage Tank Cleaning

Pro Filters: Equipment Mounted

  • If it is difficult to control the fuel contamination before it goes in your heavy equipment, we have a very cost effective solution
  • If your heavy equipment is suffering from A) Low Power (fuel starvation with filter blocking); B) Unscheduled Fuel Related Maintenance; C) Higher Emission Levels; D) High litres/BCM & overall reduction in profitability
  • Our Pro Filter equipment mounted systems can get filter changes from 250 hours to as much as 500 hours, without have any ‘Low Power’ issues. This means that not only our filters last this long, but the OEM secondary filters will also last this long.
  • Our Pro Filters are rated at 2 micron absolute & have an incredibly large surface area of cellulose, which has extremely high dirt holding capacity.
  • Our filters will also absorb water, which further protects you equipment engines
  • We have already achieved a 4.6 times longer lifer with OEM filters & a 5.5% reduction in fuel burn vs. production at an Indonesian mine site

Please see page 8 – 11 on our “Diesel Fuel Catalogue”

Download
Filter Element Efficiency

Optimal Performance from B35 or higher blends of biodiesel

Ford-Ranger-Minesite-Vehicle
CM20210429-d9417-b0b02

Pro Filters: Equipment Mounted

Pro Filters: Equipment Mounted

  • OEM filters are not only expensive, but they are not designed to withstand or last with the high levels of contamination found in biodiesel blends
  • Using our Pro Filters, you can get the life of your OEM filters to very long machine running hours & stop the ‘low power’ issues & too frequent fuel filter changes
  • Even if you have good fuel, our filters will allow you to extend out the life of your OEM filters, whilst also enjoying fuel savings & reduced emissions
  • Our Pro Filters are made from cellulose which also absorbs water & they have many times the surface area of cartridge filters, providing very high dirt holding capacity
  • We have 6 sizes to suit LV’s right up to the largest mining heavy equipment
Pro Filters: Equipment Mounted
OEM filters

Pro Filters: Equipment Mounted

Key Benefits

4

Ways you’ll benefit from using the Pro Filtration Units

1. Fuel Injector Life

  • Removing particles down to 2 microns, our filter system ensures fuel delivered to the injection system exceeds cleanliness levels required by today’s modern engines.
  • From refinery to truck to final dispensing point, most fuels have been contaminated considerably to levels which reduce injector life, a problem easily remedied by incorporating Pro Filter’s depth filtration.
  • Our filtration systems trap water molecules, preventing them from damaging expensive injector components.
  • Bacterial and algal contaminants are captured before they enter the injection system.

2. Lower Fuel Consumption

  • Improved fuel burn, meaning less fuel and more power. Independent tests carried out on an Iveco truck showed a 4.9% saving.
  • Radically improved fuel burn to production ratio (bcm)

3. Reduce Environmental Impact

  • Lower fuel consumption (average of 2 - 4% reduction) has a direct correlation to lower emissions of CO2, CO & other harmful emissions.
  • Longer OEM filter life reduces landfill wastage.
  • Increased oil life reduced the amount of waste oil requiring disposal

4. Proven Return on Investment

  • A multiplier effect of ongoing & measurable cost savings results from extended oil life, reduced fuel consumption, extended service intervals, less downtime & increased component life.
Bad Injector Spray Pattern
Pro Filters on Epiroc T45

Pro Filter mounted on Epiroc T45 drill with Cat C9.3 B engine – Gold Mine, Sumatera

Bio Gemilang Pro Filtration Units
unnamed (5)

Pro Filters: Equipment Mounted

Case Study – Diesel LV

Tests also showed reductions in:

  • Soot - 17%
  • Copper – 18%
  • Iron – 16%

Please see page 8-11 on our “Diesel Fuel Catalogue”

Download

Please watch our short video to give you an understanding about the incredibly high dirt holding capacity our Pro Filters

Contact our sales team & we will help you to get B35 biodiesel & your equipment engines delivering optimal performance & making you more money!

Pro Filtration: Fuel Polishing Cart

“Struggling with biodiesel fuel contamination with your equipment or tanks, we have a very cost effective solution!”

  • We have spent years working in Indonesia on contamination management solutions as biodiesel has been introduced in increasing quantities
  • We have developed our own fully stainless steel fuel polishing cart which has been designed & is built here to suit Indonesian biodiesel & conditions
  • Using very low cost & highly efficient filters (from 10 down as low as 0.5 µm)
  • These units allow you to clean a fuel tank without having to remove the fuel, de-gas the tank, do dangerous ‘confined space’ man entry
  • They can get your tanks & fuel a very high cleanliness standard, safely, cheaply & effectively!

Please see page 4 – 5 on our “Diesel Fuel Catalogue”

Download
Storage Tank Cleaning

Complete Workshop Fuel Testing Solution

Fuel Testing

New Product

Complete Biodiesel Laboratory

SL_Datasheet_microLab
  • Provides:
  • FAME content (ASTM D7371)
  • ISO Particulate (ASTM D4406)
  • Water (ppm)
  • Density (g/cm3)
  • Temperature (0C)
  • Prints out a fuel sample report
  • Requires only 500 ml sample

Please see page 16 on our “Diesel Fuel Catalogue”

Download

Portable FAME Tester

Summary Information

  • Correlates with ASTM D7371
  • Calibrated with Certified
  • Biodiesel Blends
  • Detectable range of 0 to 100% FAME (B—B100)
  • Portable & battery operated
    500 measurements without recharging

Application

  • The FluidInspectIR®️ – FAME uses transmission Spectroscopy, based on the ASTM D7371 standard, to extract the FAME % parameter from a biodiesel sample

 

Watch the video to see the unit working

Video
portable_briefcase

Please see page 13 on our “Diesel Fuel Catalogue”

Download

Particulate Condition Monitoring Sensor

Contamination Monitoring Sensor 2
In-line particle Monitor

The CMS 2 in-line particle monitor automatically measures and displays particulate contamination, moisture and temperature levels in diesel fuel & various hydraulic fluids. It is designed specifically to be mounted directly to systems, where ongoing measurement or analysis is required, and where space and costs are limited.

Please see page 17 – 18 on our ‘Diesel Fuel Catalogue’

Download

Portable Fuel Analysis - Particulate PPM & Density

FS9V4 Open Portable contamination measurement system

Provides:

  • ISO Particulate (ASTM D4406)
  • Digital sensor remove air bubbles (stop phantom particulate counts)
  • Temperature (0C)
  • Density
  • Water content (PPM)
  • QR Reporting

Please see page 14 – 15 on our ‘Diesel Fuel Catalogue’

Download

Please see our QR code reporting feature details

Download
× Send

Copyright © Energi Biru Solusindo.  All Rights Reserved.

Download Request Form EBS Fuel Service
Download Request Form Online Tank Conditioning Service
Download Request Form Diesel Fuel Catalogue
Download Request Form Particle Pal Plus